INDEX

5-axis Multiface Machining (1/3)

5-axis Multiface Machining (2/3)

5-axis Multiface Machining (3/3)

Simultaneous 5-axis Machining (1/3)

Simultaneous 5-axis Machining (2/3)

Simultaneous 5-axis Machining (3/3)

Matsuura 5-axis Machining Centers

[Special Site] 5-axis Machining : Simultaneous 5-axis Machining (1/3)

Reduced the the Cycle Time, Improved Machining Surface

With a 3 axis machine, spindle interference is a real problem when working with standard length tooling.

Matsuura's 5-axis configuration of the 4/5 ^th axis table eliminates this problem by means of the tilting the table during high speed machining. With a fixed spindle / tilting table configuration maximum rigidity of the tool and tool holder is achieved , whilst allowing the tool to access even the most difficult aspects of a complicated workpiece.

---

In the case of 5-axis machining, tilt cutting enables machining with a standard tool, which improves the cutting conditions.

Simultaneous 5-axis Machining Example1 (Plastic Bottle : Neck Mold)

Machining by 5-axis Vertical Linear Motor Machine LX-0 5AX, High Speed and High Accuracy Simultaneous 5-axis Machining Example. In case of 3-axis machining of mold & die, the tool contacts ZERO speed point of its rotation. But in the case of 5-axis machining, the tool contacts the high speed point (better cutting condition) because it cuts an angle.

Simultaneous 5-axis Machining Example1 (Plastic Bottle : Neck Mold) Video file(36 sec. 8.4 MB)

---

Please refer. [PRODUCTS] 5-axis Vertical Machining Center MAM72 Series

Please refer. [PRODUCTS] 5-axis Vertical Linear Motor Machine LX-0 5AX

For further details, please feel free to contact our distributors.